SIIG Computer Drive 04 0192A User Manual

Low Profile USB Adapter  
Quick Installation Guide  
Introducing the Low Profile USB Adapter  
TheLowProfileUSBAdapterconforms to the new PCI card form factor  
standard made for space constrained system designs. It is a  
high-speed Universal Serial Bus (USB) host adapter that has more  
user-friendly features than the current I/O interfaces such as serial/  
parallel ports. It works with all types of USB devices including digital  
cameras, PC video cameras, scanners, joysticks and more.  
Features and Benefits  
• Compliant to USB Specification, Version 1.1  
• Completely implements OpenHCI Specification, Version 1.0a  
• Compliant to PCI Specification, Version 2.1  
• Fully compatible with Windows Standard OHCI drivers  
• User friendly plug-n-play and hot-swapping features allow  
you to attach/remove USB devices without turning your  
system off  
• Provides 2 downstream ports for USB device connections  
• Supports both 12 Mbps and 1.5 Mbps data transfer modes  
Dimensions:  
• PCB: 119.91 mm (L) x 64.41 mm (H)  
• Bracket: 18.42 mm (W) x 79.20 mm (H)  
System Requirements  
• Pentium or equivalent computer with one available PCI slot  
• Windows 98/98 SE/ME/2000  
Package Contents  
• One Low Profile USB Adapter  
• One 5-year warranty card  
• This quick installation guide  
1
04-0192A  
 
Technical Support  
QUESTIONS? SIIG’s Online Support has the answers! Simply  
visitourwebsiteatwww.siig.comandclickonONLINESUPPORT.  
Our online support database is updated daily with new drivers  
and solutions. The answers to your problems could be just a few  
clicks away.  
Return Merchandise Authorization (RMA)  
SIIGwarrantstotheoriginalbuyeroftheproductthatthehardware  
is free of defects in materials and workmanship for a period of one,  
two or five years from the date of purchase. If your product fails to  
be in good working order during the warranty period, you may  
return it to SIIG for repair or replacement at SIIG's option.  
To return the product, you need to follow these steps.  
Step 1: Contact SIIG's RMA Department  
ToobtainanRMAnumber,SIIG'sRMADepartmentcanbereached  
by phone at (510)413-5333 or fax at (510)657-5962 or email at  
[email protected]. In order to issue an RMA number, the product  
serial number is required. This number can be found on the side of  
the box and on the back of the product.  
Step 2: Complete the RMA form  
• FilloutyourReturnMerchandiseAuthorization(RMA)form, and  
include it in the package with the product.  
• Properly pack the product for shipping. All software, cable(s) and  
other accessories that came with the original package must be  
included.  
• ClearlywriteyourRMAnumberonthetopofthereturnedpackage  
and on the accompanying RMA form.  
SIIG will refuse to accept any shipping package, and will not  
beresponsibleforaproductreturnedwithoutanRMAnumber  
posted on the outside of the shipping carton.  
Step 3: Ship the Product  
You are responsible for the cost of shipping back to SIIG at the  
following address:  
SIIG, Inc. RMA#_______________  
6078 Stewart Ave.  
Fremont, CA 94538  
SIIG will ship the repaired or replaced product via UPS Ground or  
US Mail at no cost to you.  
3
 
PRODUCT NAME  
MODEL NUMBER  
Low Profile USB Adapter  
LP0402  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCC COMPLIANCE STATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
FCC NOTICE:  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residentialinstallation. Thisequipmentgenerates, uses, andcanradiateradio  
frequency energy and if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio and  
television reception, which can be determined by turning the equipment off  
andon, theuserisencouragedtotrytocorrecttheinterferencebyoneormore  
of the following measures:  
• Reorient or relocate the receiving antenna  
• Increase the separation between the equipment and the receiver  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected  
• Consult the dealer or an experienced radio or TV technician for help  
Caution:  
Any changes or modifications not expressly approved by the party  
responsible for compliance could void the user's authority to operate  
this equipment  
THE PARTY RESPONSIBLE FOR  
PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Ave.  
Fremont, CA 94538-3152  
Low Profile USB Adapter is a trademark of SIIG, Inc.  
SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows  
NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of  
Intel Corporation. Other names used in publication are for identification only and may be  
trademarks of their respective companies.  
November, 2000  
Copyright ©2000 by SIIG, Inc. All rights reserved.  
 

Sony Carrying Case LFA PC2 User Manual
Sony Clock Radio ICF C470 User Manual
Sony Microphone ECM 719 User Manual
Sony PDAs Smartphones PRS 300 User Manual
Sony Stereo System 3 452 364 111 User Manual
Sony VCR GV D900E User Manual
Stanton Turntable STR8 30 User Manual
Sunbeam Mixer M98111 000 000 User Manual
Sunbeam Rice Cooker 4704 User Manual
Sunbeam Waffle Iron WM3100 User Manual